Thu, Mar 30, 2023

A hydraulic pump is a device that is meant to convert mechanical energy into hydraulic energy. As far as industrial uses are concerned, Parker hydraulic pumps should always be preferred. There are various ways to power these pumps, as either gasoline, diesel, natural gas or electricity can be used for the cause. Let’s take a look at some of the major advantages of using hydraulic pumps: 


Energy Efficient 


In an industrial area, resources are scarce. Since they are needed for alternative purposes, it is necessary to use them efficiently. When you install hydraulic pumps in industrial areas, they will consume less energy than other pumps. They are said to be 80% more efficient when compared with pneumatic type systems. When you use such pumps regularly, you’re going to safeguard an insane amount of energy. The same energy can be used for other causes in the times to come. 


Easy To Control 


Pumps can be difficult to manage only until you install a hydraulic pump in your organisation. It is because hydraulic systems are quite easy to manage. You can comfortably set the speed and flow control in it. When you compare it with other options available in the marketplace, the management here is extremely simple. When the system is difficult to manage, the chances of damage are higher. So when you use a hydraulic pump, there’s little to no damage to the area where the pump is being used. Keeping such a pump in an idle position wouldn’t create many adversities. 


Less Maintenance Cost 


Since hydraulic pumps are easy to manage, you can cope with their maintenance comfortably. This system is self-lubricating. In other types of pumps, it bothers me when you are worried about moisture, oil-based clearing, scaling, and rust. You don’t have to care about all these issues, thanks to their self-lubricating nature when it comes to hydraulic pumps. Pumps generally suffer from the problem of icing too. Such an issue can occur when the pump’s circulation causes the cooling of the rapidly discharged compressed air. The problem of icing is eliminated by hydraulic pumps completely. 


Types Of Hydraulic Pumps


There are three major hydraulic pumps, vane pump, gear pump and radial piston pump. 


  • Piston pumps are meant to function smoothly. They work effortlessly with large flows at high hydraulic system pressures. It operates through pistons and moves back and forth in the cylinders connected to the hydraulic pump. 
  • As far as vane pumps are concerned, they are meant to use the back and forth movement of vanes inside slots. These are rectangle-shaped vanes that are meant to move fluids. 
  • Lastly, gear pumps use the actions of rotating cogs or gears to transfer fluids. These are the most popular options as far as hydraulic pumps are concerned.


As you can see, hydraulic pumps can prove advantageous in industrial work. You can choose any of the three options in Parker hydraulic pumps based on your liking!


Related Article

No Related Article