After installing newly, marble floors will have a perfect gloss and reflective finish to it, which will shift with changes in light. The main goal is to provide that elegant look to the room. But, with daily use, the finish starts to dim out and will lose its lustre when the tiles get scratched and become dull. This can turn out to be a major problem, mainly if you are planning to sell your place.
Cleaning the marble floor at this point will make no major difference. Broken or scratched marble tiles will remain dirty, no matter how much you try to clean it. But, everything is not over as there is still hope to restore the glory of marble flooring. For that, you need to head towards marble floor restoration. Thanks to some of the experienced labourers, you will not just restore your floor’s previous finish, but also get to repair the broken surface and buff shine right into it. It will turn your marble floor as good and shiny as new.
Focusing on the steps now:
If you are planning to get your marble floors restored, there are some significant steps you need to follow for that. Ask experts to do it on your behalf if you don’t have the right knowledge or tools for it.
- First of all, search the floor for any broken or loosen tiles and plan for its replacement. Strip grout that is surrounding the tile you are about to remove. Place the end of the pry bar under the damaged or loose tile and pull the tiles away.
- Clean the subfloor under the tile. Scrape the mortar. You can use the help of a rotary tool for that, which comes with a carbide blade. After you have removed the mortar, turn the tool off and sweep the mortar up from the surface of the subfloor.
- Now, you need to place the loosened tiles and place them onto the floor using thin-set mortar. Spread it near the rear of tiles using notched up steel trowels. Press tile to the floor, aligning it with the other tiles and maintain right spacing. Make sure to replace the broken tiles with a new one and it should match with the other tiles.
- Now, re-grout the joints by spreading grout across the tile surface with a float for filling up the joints wholly. Remove extra grout using a damp sponge within 15 minutes of placing it. After waiting for 2 hours, wipe the tile’s surface with a lint-free cloth. Next, you have to wait for 24 hours before the next steps.
- Remove scratches from the floor by honing the surface. Then use a grinder with a polishing pad to start polishing the marble tiles. Opt for the grey polish later, followed by buffing the dried polish to gloss. For the last step, brush some stone sealant over marble as it prevents staining. Give around 48 hours for the sealant to dry before you start using the floor!
These are the simple steps involved with marble floor restoration. Follow the process or just ask the experts to cover it for you.