Floating timber floors are an excellent way to combine an industrial aesthetic with rustic elements in a space. A floating floor is distinguished by the fact that it is not attached to the subfloor with nails or screws, but rather by floating it on top of it and arranging pieces of wood side by side on top of it. When opposed to conventional floorboards, which must be hammered down, this technology provides for a speedier installation and more freedom in terms of design.
Because they do not rest directly on the ground, floating timber floors provide additional advantages in terms of moisture and termite resistance, making them an excellent choice for wooden houses situated amid trees or near rivers, which answers the very frequently asked question, “Why should I install timber flooring in my house.” Below, we’ll go through the fundamental processes you’ll need to know when installing floating timber floors yourself:
Get all of the necessary equipment and supplies, such as floating glue, an off-cut piece of wood, a notebook, and a pencil, before you start working on your floating timber floors as the first stage. Once you have assembled all of the components for the floating floor installation, you must ensure that the subfloor is sound and level.
Tongue and groove boards that have been kiln dried are often used as floating timber floors because they create a uniform surface that conceals any unevenness in the subfloor underneath. The procedure of installing a floating floor begins with the installation of one complete board face down on the floor, followed by the placement of an off cut behind it, followed by the installation of another full plank on top of them both. Continue in this manner until all of the boards required for your floating floor design have been placed down.
Once your floating timber floors design is complete, leave it overnight to enable the floating glue to cure for 24 hours before laying the floor and to allow moisture to escape from the join. This will ensure that the floor will not warp. Using a trowel or floating floor squeegee, the floating adhesive may be distributed uniformly throughout the floor to complete the installation.
-
Following application of the floating glue:
Your floating timber floors will be able to float overnight without any assistance. Make sure you place some weights on top of each board before you go to bed to increase the stability and security your floating flooring design has. Using a spirit level during this operation is optional, but it is often utilized to get the finest floating wood outcomes across longer distances, such as corridors and big living rooms, when installing floating timber.
Once your floating timber floors have been weighed down, check to see that none of them are jutting out too much above the surface by placing something underneath them if they are more than 5 mm in height. Allow them to dry for 24 hours before putting them in the water.
After you have completed the installation of floating timber floors, you should allow your floating timber floors to cure for 72 hours to guarantee that the floating glue is completely dry and sturdy. After that, you can sand down any rough portions or high spots that may have formed on the floating wood floor design and coat it with a sealer of your choosing to keep it looking fantastic while also protecting it from dirt and moisture damage.
