Are you willing to conduct plantation shutters installation on your own? It would be a good move considering the amount of money you can save on the procedure. Professional services will always be costly, sometimes exceeding the budget set out on your part. If you have done its installation in the past, you must be considering a few tips to know more about it. We will provide you with a step-by-step guide that’s going to be extremely helpful:
Select Your Shutters
The first thing that you have to do in the installation of plantation shutters is to select the right shutters. You have to choose a safe supplier in your area, somebody who’s well known for his services. Trust a particular brand that has been considered a safe supplier of shutters for many years.
Unpack & Locate
Once you have bought plantation shutters, the next thing to do is unpack the item and locate the installation hardware. You’ll also find all of the hardware you need to be attached to each set of blinds. You need to set that hardware aside before conducting the installation of plantation shutters.
Assemble Frame
This can be a challenging task, so you have to go about things carefully. In case your blinds and the outside frame are already attached to the actual shutter panels, you don’t have to assemble things at all. But in case you have a separate frame, you’ll need to assemble the frame and attach the shutter to the hinges. Carefully attach the pieces.
Reinforce Pilot Holes
There are four pre-drilled holes in the left and right panels of the frame. In case these holes are straight, you don’t have to do anything else. But in case these pre-drilled holes are not great, you will have to reinforce them on your own. It’s not a tough job as long as you have an efficient drilling machine available with you for the installation of plantation shutters.
Securing The Frame
In the next step, you have to secure the frame to the window. First of all, you have to put the longer set of screws in the hardware pack in the four holes on the left and right sides of your frame. Thereafter, you have to line the frame up with the window frame. Now you can install the longer screws into the window frame. You have to make again sure that these go in as straight as possible, just like the pre-drilled holes.
Attach Shutter Panels
Now that you have secured the frame, the next thing to do would be to attach shutter panels. First of all, pull off the plastic cap from the end of the hinge pin. You have to take pins out of each panel and set them aside. Line your hinges up using the magnets that will hold your panels closed for help in securing them in place. The last thing that you would do is put the pin back in to secure them together.
Finish The Frame
In the last step of the installation of plantation shutters, you have to finish the frame. If the fit of your frame is perfect, you don’t have to consider much here. But in case there is a small game after installing the shutters, you have to use caulk for finishing. Since you have done the job on your own, the measurements are bound to be imperfect. You can easily caulk the gaps, so there’s nothing to worry about here.
These are some of the important steps involved in the installation of plantation shutters. You should keep them all in mind for the best results!